Ordering a custom logo mat from Logo Floor Mats is straightforward, but getting the right size is crucial to making sure your branded floor mat looks perfect in your space and delivers the impact you want. A mat that is too small gets lost in your entryway. A mat that is too large becomes an obstruction. The key to success is taking accurate measurements of your space before you order.

Why Getting the Size Right Matters

Your entrance is where first impressions happen. A custom logo mat puts your brand underfoot every single day, but only if it fits your space properly. An undersized mat fails to anchor your entryway or protect floors the way you intended. An oversized mat creates a safety hazard, blocks door swings, or looks awkward against your existing decor. When you measure carefully before ordering, you ensure your logo mat serves both as a functional floor protector and as an effective branding tool.

The good news is that measuring is simple. You don’t need special equipment beyond a standard tape measure.

Step 1: Identify Your Entryway Zone

Before you pull out the tape measure, step back and look at your entrance. Most businesses use logo mats in their lobby, at the base of glass doors, or just inside the main entrance. Decide exactly where you want your mat positioned. This becomes your measurement zone.

Consider what’s already in place. Is there existing furniture, a reception desk, or architectural features near the entrance? Your logo mat should fit comfortably in the clear floor space, leaving adequate room for doors to open and close without obstruction.

Step 2: Measure the Width

Width is your left-to-right measurement. Ideally, your logo mat should span most or all of the entry width. For standard interior entryways, this is typically between 2 and 4 feet wide, though custom shapes are available.

Here’s how to measure accurately:

1. Stand directly in front of the space where your mat will go
2. Place one end of your tape measure at the far left edge of where the mat should begin
3. Pull the tape across to the far right edge
4. Record the measurement in inches
5. For doors, measure the width of the door frame or the floor space in front of the doors

Round down to the nearest inch if you’re in between measurements. It’s better to go slightly smaller than to have a mat that’s too large.

Step 3: Measure the Depth

Depth is your front-to-back measurement, running perpendicular to the door or entrance. This controls how far the mat extends into your space. Depth typically ranges from 2 to 6 feet for most commercial applications.

To measure depth:

1. Stand to one side of the entry zone
2. Place the tape measure at the very front of where your mat should start (usually at or just inside the door threshold)
3. Pull the tape straight back into your space
4. Record the measurement in inches
5. Consider traffic flow: a deeper mat (4 to 6 feet) catches more dirt and provides better brand visibility, while a smaller depth (2 to 3 feet) works in tight spaces

Think about how far people typically walk before reaching your reception area or main floor. Your mat should cover that initial walking zone to maximize its effectiveness as both a dirt-trapping floor protector and a branding element.

Step 4: Note Any Obstacles or Special Considerations

As you’re measuring, note anything that might affect your mat choice:

• Door clearance: Make sure your mat won’t interfere with door hinges or swing
• Threshold height: Some entries have raised thresholds that may affect mat placement
• Adjacent surfaces: Check if carpet, tile, or wood flooring meets your entry space, as this might influence mat style
• Traffic volume: High-traffic areas may benefit from slightly larger mats or thicker materials like WaterHog to handle wear better
• Outdoor vs. indoor: If your entry is exposed to the elements, note this, as outdoor mats require different materials

Logo Floor Mats offers a range of styles including Berber Impressions, ColorStar, WaterHog, and SuperScrape, each suited to different environments and traffic levels. Knowing your space helps you choose the right one.

Step 5: Consider Custom Shapes

If your entryway has an unusual configuration, don’t assume you’re limited to a standard rectangular mat. Logo Floor Mats offers custom shapes through options like the ColorStar Impressions HD Custom Shape. If your entry is L-shaped, rounded, or requires a cutout for a post or structural feature, measure those dimensions carefully and include them when you contact Logo Floor Mats.

Custom shapes cost a bit more and may take slightly longer to produce, but they allow your logo mat to fit your space perfectly rather than forcing a standard mat where it doesn’t quite work.

Step 6: Double-Check Your Measurements

Before you place your order, measure at least twice. Have someone else verify your numbers if possible. Mistakes at this stage are frustrating and costly. Write down your measurements clearly:

• Width: _______ inches
• Depth: _______ inches
• Material preference (Berber, ColorStar, WaterHog, etc.): _____________
• Indoor or outdoor: _____________
• Any special notes about obstacles or custom needs: _____________

Once you have your measurements locked in, you’re ready to upload your logo and move forward with your order.

What Happens Next

With your measurements in hand, the ordering process moves quickly. You’ll upload your logo, and Logo Floor Mats will create a free art proof for your signature approval. Most indoor mats ship in five business days, so you’ll have your branded floor mat in your space fast.

If you have any questions about sizing or aren’t sure which mat style works best for your measurements and traffic level, the team at Logo Floor Mats can help. They’ve been working with businesses, schools, government facilities, and hospitality venues since 1996, and they know how to guide you to the right choice.

Taking 10 minutes to measure your space carefully ensures your custom logo mat arrives ready to go, fits perfectly, and starts reinforcing your brand the moment customers walk in the door.